Description
This is the proper oil feed and drain setup for our On 3 Performance line of turbochargers (t4). This is what you would want if you are seeking a feed plate for the On3 61J, 6766J, 70J, 76J, 78J, 80J and 86J. All J for Journal bearing turbochargers. If you are running one of our premium upgraded On3 ceramic ball bearing units, you will need to upgrade the feed plate to the restrictor unit which cuts down the oil flow (REQUIRED). The fittings are configured so that you would have a -4an fitting coming into the turbo for the feed and a 5/8" drain hose. That will keep the turbo properly lubricated and draining, anything different is not recommended and this is the time proven and tested solution you will need
This is for the Feed Plate and 4an Fitting only, nothing else included. If you need the drain and the bolts as well there is another listing for the complete kit.